SYJ-40-LD Compact 4-Inch Diamond Saw for Manual Sample Cutting
Prepare small material blanks before grinding or polishing with the SYJ-40-LD. A 4-inch blade, adjustable spindle speed and manually guided cutting make this compact saw suitable for rough sectioning rather than precision wafer dicing.
- 最終構成は見積前に確認
- 用途に応じてカスタムと付属品を確認
- 輸出梱包と書類は必要に応じて対応
- Crystal and ceramic blank preparation
- Pre-sectioning before grinding and polishing
主な製品特徴
-
Variable-speed direct-drive spindle
-
Removable housing for cleaning
-
Manual feed for small sample blanks
技術仕様
仕様はシステム別に整理され、設備タイプごとに重要なパラメータを表示します。
Key specifications
| Blade size | 4-inch diameter; 0.35 mm thickness; 0.5-inch arbor |
|---|---|
| Spindle speed | 400-3250 rpm |
| Maximum cutting depth | 25.4 mm |
| Maximum sample width | 40 mm, limited by holder opening |
| Maximum sample loading length | 6 inches |
| Electrical supply and power | 110 V AC, 50/60 Hz; 120 W |
仕様は構成やカスタム内容により変更される場合があります。最終データは確認済み見積に従います。
Confirm the blade type and sample restraint for the material. A vise is not assumed to be included. The listed supply is 110 V AC; other mains voltages require a suitable confirmed power arrangement.
Images may show optional accessories. Confirm blade, fixtures, electrical configuration and delivered items with LabSova before ordering.
海外購入者向けに、構成、付属品、梱包方法、輸出書類、検査写真または動画、出荷条件を見積確認に含められます。
同カテゴリのその他製品
SYJ-DS100-LD Manual Diamond Scriber for Single-Crystal Wafers
詳細を見る →
SYJ-30 10-Inch Abrasive Sectioning Saw for Laboratory Samples
詳細を見る →
SYJ150 Digital Low-Speed Diamond Saw for Precision Sample Sectioning
詳細を見る →
SYJ160 6-Inch Low-Speed Diamond Saw with Digital Positioning
詳細を見る →
SYJ190 Multi-Blade Low-Speed Saw for Wafer Sectioning
詳細を見る →
SYJ-1000 Variable-Speed Sectioning Saw with Gravity and Manual Feed
詳細を見る →
SYJ-400 CNC Dicing Saw for 4-Inch Wafer and Material Samples
詳細を見る →