Abastecimiento de equipos de laboratorio
Abastecimiento de equipos de laboratorio para investigación y producción piloto.
Máquina automática de llenado y cierre de tapas para bolsas con boquilla de seis salidas
Se utiliza para el llenado totalmente automático y el envasado integrado con tapa de bloqueo de productos líquidos y pastosos en bolsas autocebantes.
Máquina de llenado y engargolado de polvo de doble cabezal
Se utiliza para el llenado y taponado automático de doble cabezal de productos en polvo de pequeña capacidad y es adecuado para el envasado automático de viales, botellas de aceites esenciales y otros tipos de botellas.
Máquina tapadora de cuatro ruedas
El equipo taponador de cuatro ruedas de la serie de sellado se utiliza para el proceso de ajuste de tapas de botellas.
Etiquetadora posicionadora para botellas redondas
Equipo automatizado para posicionamiento y etiquetado de botellas redondas, apto para etiquetar productos con un diámetro exterior de 25-90 mm.
Máquina automática de llenado y engargolado de viales (polvo)
Se utiliza para el llenado, taponado, taponado y envasado automático de un solo cabezal de productos en polvo para viales.
Etiquetadora de sobremesa para superficies planas
Equipo de etiquetado plano de sobremesa, adecuado para el etiquetado de productos planos.
Etiquetadora de sobremesa para botellas redondas
Equipo de etiquetado de botellas redondas de escritorio, adecuado para etiquetar productos de botellas redondas.
Máquina automática de llenado y engargolado de 6 cabezales
Se utiliza para el llenado y taponado completamente automático de 6 cabezales de productos líquidos de pequeño volumen, utilizando control PLC y llenado con bomba peristáltica.
Máquina de llenado y engargolado de líquidos de doble cabezal
Llenado y engargolado automáticos de doble cabezal para productos líquidos de pequeño volumen, adecuados para el envasado continuo de líquidos embotellados.
Máquina automática de llenado y engargolado de viales (líquidos)
Diseñada para el llenado automático de un cabezal, inserción de tapones, alimentación de tapas, salida de botellas e integración con etiquetado para productos líquidos en viales.
Equipo de atomización por gas (VIGA/EIGA)
Los equipos de atomización de gas por inducción al vacío y de atomización de gas por inducción con electrodos utilizados para la preparación de polvo metálico pueden personalizarse y actualizarse de forma modular según el sistema de materiales, la capacidad de producción y los requisitos especiales del proceso.
Horno semiautomático
Horno semiautomático utilizado en cosmética, medicina, biología, agricultura, investigación científica y otros departamentos para almacenar hongos y organismos de cultivo.
Máquina llenadora de alta velocidad de un cabezal
Equipo de envasado utilizado para llenado cuantitativo de alta velocidad con un solo cabezal, adecuado para llenar productos con una capacidad de 10 ml o más.
LS-E-02 Touchscreen Electrospinning Machine
Enclosed electrospinning system with independent solution feeding, 0 to +30 kV high voltage and temperature control up to 65°C. Three collector types and adjustable traverse.
Equipo de esferoidización por plasma de microondas (MPS)
Para el desarrollo de polvos especiales para la fabricación aditiva y la construcción de líneas de producción, brindamos soluciones para la preparación, cribado y clasificación de polvos, envasado sin oxígeno y automatización de procesos completos.
Equipo de esferoidización por plasma de microondas (MPS)
Se introduce polvo metálico irregular o polvo cerámico en plasma de microondas de alta temperatura utilizando un alimentador de polvo, y la superficie del polvo se vuelve a fundir a una temperatura alta superior a 2000 °C en el centro, y luego se solidifica y se enfría hasta obtener un polvo con alta esfericidad, o la superficie del polvo microfundido se recubre con partículas reforzadas a nanoescala.
PCH-600C Manual Hot Press with 100 × 100 mm Platens
Manual hydraulic hot press with a 0–24 tonne load range, dual 100 × 100 mm octagonal heating platens and a 7-inch touchscreen. Available with 300°C or 500°C heating configurations; water chiller optional.
Equipo de atomización por electrodo rotativo de plasma (PREP)
La varilla de metal del ánodo se funde bajo la acción del arco caliente de plasma, y las gotas de metal fundido divergen en pequeñas gotas a lo largo de la dirección tangencial bajo la acción de la fuerza centrífuga, y finalmente se solidifican y se esferoidizan en polvo.
Equipo de atomización de alambre por plasma (PA)
El alambre de metal en bruto se funde, atomiza y rompe simultáneamente en finas gotas de metal mediante chorros de plasma térmico de alta temperatura y alta velocidad generados por una o más antorchas de plasma, y finalmente se solidifica y enfría hasta obtener un fino polvo de metal.
Máquina neumática de engargolado para viales
Equipos neumáticos para engarzar y sellar viales.
Equipo de esferoidización por plasma de radiofrecuencia (PS)
Se introduce polvo metálico irregular o polvo cerámico en plasma de alta temperatura y alta frecuencia mediante un alimentador de polvo. El polvo se vuelve a fundir a una temperatura alta, superior a 8000 °C en el centro, y luego se solidifica y se enfría hasta obtener un polvo con alta esfericidad.
Máquina llenadora rotativa
Equipos de llenado de tipo rotativo para cosméticos y productos para el cuidado de la piel de pequeño volumen, teniendo en cuenta la velocidad, precisión y estabilidad del llenado.
Etiquetadora semiautomática por rodillo para superficies planas
Equipo semiautomático para etiquetado en rollo de productos planos.
Lavadora semiautomática de viales
Equipo semiautomático para limpieza de viales, apto para proceso de limpieza de viales.
Máquina llenadora de líquidos semiautomática
Equipo de llenado de líquidos de la serie semiautomático, apto para el llenado de productos líquidos.
Máquina llenadora de polvo semiautomática
El equipo de llenado de polvo de la serie semiautomática es adecuado para llenar productos en polvo.
Etiquetadora semiautomática para botellas redondas
Equipo semiautomático para etiquetado de productos de botellas redondas.
Máquina llenadora vertical semiautomática
Equipo de llenado vertical de la serie semiautomático, apto para escenarios de llenado de líquidos, pastas o polvos.
SYJ-DS100-LD Manual Diamond Scriber for Single-Crystal Wafers
Score thin single-crystal substrates without a motor-driven saw. The SYJ-DS100-LD series combines a diamond scribing tool with spring-adjustable pressure and selectable working areas for small wafer preparation tasks.
Equipo de atomización centrífuga rotativa de ultra alta velocidad (HCA)
La fuerza centrífuga generada por la rotación mecánica se utiliza para expulsar el metal fundido del recipiente giratorio de alta velocidad, dispersarlo en finas gotas y luego enfriarlo y solidificarlo en un polvo fino.
Equipo de atomización ultrasónica (UA) con fusión por inducción
El metal se funde por inducción y se vierte sobre una fina lámina de metal. Bajo la acción de ondas ultrasónicas, el líquido metálico vibra a una frecuencia ultrasónica. La vibración hace que el metal fundido formado en la lámina de metal vibre y se separe en gotas de metal, que luego se enfrían en pequeñas partículas.
UNIPOL-300 Mini Automatic Grinder and Polisher for 25 mm Samples
Prepare individual metallographic and TEM specimens with a compact 3-inch grinding and polishing platform. UNIPOL-300 combines a moving specimen holder, adjustable spring load and a programmable timer for small-sample laboratory work.
Equipo de fusión por inducción al vacío.
El equipo utiliza calentamiento por inducción de frecuencia media para fundir y sintetizar los elementos de aleación en el crisol en condiciones de vacío o protección con gas inerte. Después de cumplir con los requisitos técnicos, el líquido del metal fundido se vierte en el molde prefabricado a través de un mecanismo de inclinación para preparar lingotes de aleación o piezas fundidas. Es adecuado para la preparación de aleaciones a base de níquel, aleaciones a base de hierro, aleaciones a base
LS-E-03 Touchscreen Electrospinning Machine
Enclosed electrospinning system with independent solution feeding, -30 to +30 kV high voltage and temperature control up to 65°C. Five collector types and a five-axis platform.
PC-2 Two-Column 2T Manual Press
PC-2 Two-Column 2T Manual Press. Pressing load range: 0-2T; Working space: 85 × 120 mm; Maximum piston stroke: 30 mm.
SYJ-40-LD Compact 4-Inch Diamond Saw for Manual Sample Cutting
Prepare small material blanks before grinding or polishing with the SYJ-40-LD. A 4-inch blade, adjustable spindle speed and manually guided cutting make this compact saw suitable for rough sectioning rather than precision wafer dicing.
UNIPOL-800 Benchtop 8-Inch Grinder and Polisher, 500–3000 rpm
UNIPOL-800 is a compact direct-drive grinder and polisher with an 8-inch working plate. Its 500–3000 rpm range supports diamond-disc grinding and subsequent pad polishing on the same benchtop machine.
EQ-UNIPOL-820 Dual-Platen 8-Inch Grinder and Polisher with Independent Speed Control
Run two preparation stages side by side with EQ-UNIPOL-820. Each 8-inch platen has its own 300 W motor and digital speed control, while magnetic mounting supports changes between abrasive papers and polishing pads.
LS-E-04 Micro/Nanomaterials Workstation
LS-E-04 micro/nanomaterials workstation in the Huizhi electrospinning equipment range. The available catalogue identifies the workstation but does not specify its feed system, collectors or operating limits.
PC-3 Two-Column 3T Manual Press
PC-3 Two-Column 3T Manual Press. Pressing load range: 0-3T; Working space: 90 × 125 mm; Maximum piston stroke: 30 mm.
LS-D-01 Handheld Electrospinning Device
Portable electrospinning device with 10 kV output, a 5 mL syringe and 10-15 cm working distance. Selected organic-solvent systems; formulation compatibility should be confirmed.
PC-5 Two-Column 5T Manual Press
PC-5 Two-Column 5T Manual Press. Pressing load range: 0-5T; Working space: 90 × 125 mm; Maximum piston stroke: 30 mm.
SYJ-30 10-Inch Abrasive Sectioning Saw for Laboratory Samples
Section small metallographic blanks with the SYJ-30 wet abrasive saw. Its 1.1 kW motor drives a 10-inch cutting wheel at a fixed 2800 rpm, with a rated cutting section of 30 x 30 mm and a quick-clamping vise.
UNIPOL-810 Fixed-Yoke 8-Inch Precision Lapping and Polishing Machine
UNIPOL-810 combines an 8-inch lapping plate with a fixed yoke, conditioning ring and flat-sample holder. Adjustable speed up to 600 rpm supports preparation of flat components and mounted laboratory specimens.
LS-D-03 Handheld Electrospinning Gun
Portable electrospinning device with 15 kV output, a 5 mL syringe and 10-15 cm working distance. Most organic-solvent solutions; formulation compatibility should be confirmed.
PC-12 Two-Column 12T Manual Press
PC-12 Two-Column 12T Manual Press. Pressing load range: 0-12T; Working space: 96 × 130 mm; Maximum piston stroke: 30 mm.
SYJ150 Digital Low-Speed Diamond Saw for Precision Sample Sectioning
Control sample sectioning at up to 600 rpm with the SYJ150 low-speed saw. A digital micrometer sets lateral sample position, while the 4-inch blade arrangement offers a listed maximum cutting depth of 32.5 mm.
UNIPOL-802 Two-Station 8-Inch Lapping and Polishing Machine
Prepare two specimens with independently rocking workstations on an 8-inch platen. UNIPOL-802 provides a 0–250 rpm plate-speed range, timed operation and a choice of cast-iron or aluminum working plates.
LS-D-04 Adjustable Handheld Electrospinning Gun
Portable electrospinning device with 0.1-26.0 kV output, a 5 mL syringe and 10-15 cm working distance. Organic-solvent and aqueous solutions; formulation compatibility should be confirmed.
PC-15B Two-Column 15T Manual Press
PC-15B Two-Column 15T Manual Press. Pressing load range: 0-15T; Working space: 140 × 160 mm; Maximum piston stroke: 30 mm.
SYJ160 6-Inch Low-Speed Diamond Saw with Digital Positioning
The SYJ160 extends low-speed laboratory sectioning to a maximum 6-inch blade and a listed 50 mm cutting depth. Adjustable speed and digital micrometer positioning help set up controlled cuts in small research specimens.
UNIPOL-900Z / UNIPOL-1200Z Vibratory Polishers for Laboratory Sample Finishing
Choose a vibratory polishing platform by bowl size and available bench space. The UNIPOL-900Z and UNIPOL-1200Z variants offer 231 mm and 304.8 mm working plates respectively for laboratory specimen finishing.
LS-10 Entry-Level Electrospinning Machine
Laboratory electrospinning machine with 0 to +30 kV output, precision syringe feeding and drum/flat collectors. Adjustable nozzle traverse for collection.
PC-15 15T Manual Press
PC-15 Manual Press. Pressing load range: 0-15T; Working space: 80 × 140 mm; Maximum piston stroke: 30 mm.
SYJ190 Multi-Blade Low-Speed Saw for Wafer Sectioning
Prepare multiple parallel cuts with the SYJ190 multi-blade saw. The 6-inch blade platform combines 50-680 rpm speed control, micrometer positioning and a tilting sample stage for small wafer and material-sectioning work.
UNIPOL-1202 12-Inch Wafer Lapping and Polishing Machine with Two Workstations
UNIPOL-1202 processes two wafers up to 4 inches in diameter on a 12-inch platen. Independent rocking stations, timed operation and interchangeable plate materials support laboratory lapping and polishing workflows.
LS-11 Enclosed Laboratory Electrospinning Machine
Laboratory electrospinning machine with 0 to +30 kV output, precision syringe feeding and drum/flat collectors. Adjustable nozzle traverse for collection.
PC-24 24T Manual Press
PC-24 Manual Press. Pressing load range: 0-24T; Working space: 80 × 150 mm; Maximum piston stroke: 30 mm.
SYJ-1000 Variable-Speed Sectioning Saw with Gravity and Manual Feed
Switch between gravity-fed sectioning and manual rough cutting with the SYJ-1000. Its 4- to 8-inch blade options cover different specimen depths, while a digital micrometer and adjustable vise help set slice position and orientation.
UNIPOL-1200S Pressure-Controlled 300 mm Automatic Lapping and Polishing Machine
Adjust platen speed, specimen rotation and applied load independently with UNIPOL-1200S. A 300 mm polishing plate and touchscreen controls support multi-sample metallographic preparation and extended polishing runs.
LS-12 Temperature-Controlled Electrospinning Machine
Laboratory electrospinning machine with 0 to +30 kV output, precision syringe feeding and drum/flat collectors. Chamber heating up to 65°C.
PC-30 30T Manual Press
PC-30 Manual Press. Pressing load range: 0-30T; Working space: 92 × 160 mm; Maximum piston stroke: 30 mm.
SYJ-400 CNC Dicing Saw for 4-Inch Wafer and Material Samples
Set programmable cutting paths for small wafers and rectangular specimens with the SYJ-400. Three-axis feed control, a variable-speed spindle and vacuum-chuck mounting support research-scale dicing and material evaluation.
UNIPOL-1203 Two-Station 300 mm Automatic CMP Polisher with Slurry Feeding
UNIPOL-1203 combines two independently controlled workstations with a 300 mm stainless-steel polishing plate and automatic slurry delivery. Touchscreen settings coordinate platen motion and polishing duration for laboratory CMP work.
LS-02 Integrated Laboratory Electrospinning Machine
Laboratory electrospinning machine with 0 to +30 kV output, precision syringe feeding and drum/flat collectors. Chamber heating up to 65°C.
PC-40 40T Manual Press
PC-40 Manual Press. Pressing load range: 0-40T; Working space: 106 × 180 mm; Maximum piston stroke: 40 mm.
SYJ50 Wet Abrasive Cut-Off Saw for 50 mm Metallographic Samples
Prepare metallographic cross sections with the SYJ50, also identified as SYJ-50. A 1.5 kW spindle, 10-inch wheel and dual clamping arrangement support wet cutting of specimens up to the listed 50 mm diameter capacity.
UNIPOL-1502 15-Inch Precision Wafer Polisher for Three 4-Inch Samples
UNIPOL-1502 provides three yokes around a 15-inch platen for batch wafer preparation. It supports three 4-inch specimens or a single larger wafer with the appropriate holder configuration, with speed control up to 125 rpm.
LS-SX-02 Nanofiber Yarn Spinning Machine
Nanofiber yarn system with positive/negative high voltage, dual independent feed pumps and chamber temperature control up to 65°C.
PC-15F 15T Guarded Manual Pellet Press
PC-15F Guarded Manual Pellet Press. Pressing load range: 0-15T; Working space: 80 × 140 mm; Maximum piston stroke: 30 mm.
PC-2N Manual Coin Cell Crimper
PC-2N Manual Coin Cell Crimper. Pressing load range: 0-2T; Crimping load: Generally between 0.8 and 1.2 tons; Piston diameter: Chrome-plated oil cylinder Ø32 mm.
SYJ-200 Programmable Sectioning Saw with Automatic X-Y Feed
Use programmable X-Y movement for repeated sample sections with the SYJ-200. A touchscreen controls manual or automatic operation, while the 300-3500 rpm spindle accepts 6- to 8-inch blades for different sectioning requirements.
UNIPOL-1500-S16 Automatic Metallographic Polisher for 16 Samples
Prepare up to 16 mounted specimens per batch using two upper sample carriers over a 380 mm polishing plate. UNIPOL-1500-S16 offers touchscreen settings for load, rotation and polishing time for higher-throughput metallographic workflows.
LS-04 Conjugate Electrospinning Machine
Four-pump conjugate electrospinning system with bipolar high voltage, six collector types and dual independent traverse axes for fiber, tube and yarn experiments.
PC-24F 24T Guarded Manual Pellet Press
PC-24F Guarded Manual Pellet Press. Pressing load range: 0-24T; Working space: 112 × 160 mm; Maximum piston stroke: 30 mm.
SYJ800 CNC Wafer Dicing Saw with Programmable Rotating Stage
Combine X-Y cutting paths with a motorized rotating stage on the SYJ800. The 8 x 8 inch dicing area and selectable 4- or 6-inch blade configurations allow laboratories to match the cutting setup to the specimen and required depth.
UNIPOL-2001 Three-Station 20-Inch Precision Grinder and Polisher
UNIPOL-2001 uses a 508 mm working plate and three independently controlled rocking stations for larger-wafer preparation. A 1.7 kW drive supports grinding and polishing with cast-iron and aluminum plate configurations.
LS-LX-01 Continuous Electrospinning Collection System
Roll-to-roll electrospinning collection system with up to 30 needles, adjustable collection width up to 300 mm and continuous substrate transport at 1-300 cm/min.
PC-30F 30T Guarded Manual Pellet Press
PC-30F Guarded Manual Pellet Press. Pressing load range: 0-30T; Working space: 112 × 160 mm; Maximum piston stroke: 30 mm.
SYJ-30QY CNC Diamond Core Drill for Cylindrical Material Samples
Extract cylindrical specimens from bulk material using the SYJ-30QY hollow-core drilling system. CNC-controlled vertical feed, manually positioned X-Y axes and selectable diamond core tools support small sample preparation for materials analysis.
UNIPOL-1210S Automated Lapping and Polishing System with Sample Conveyor
UNIPOL-1210S integrates lapping, polishing and sample-tray conveyance for an automated preparation workflow. It combines a five-sample holder with adjustable spindle speed, loading and process speeds.
LS-SF-03 Laboratory Wet Spinning Line
Laboratory wet spinning line integrating dual-channel metering, a temperature-controlled coagulation bath, washing, three drawing stages, drying and fiber winding.
PC-40F 40T Guarded Manual Pellet Press
PC-40F Guarded Manual Pellet Press. Pressing load range: 0-40T; Working space: 136 × 180 mm; Maximum piston stroke: 40 mm.
SYJ-1610 Air-Bearing Dicing Saw for 6-Inch Wafers
The SYJ-1610 is an air-bearing spindle platform for thin-wafer dicing. A 3000-50000 rpm speed range, camera-assisted alignment and programmable control support laboratory wafer processing with dedicated cooling-water and clean-air services.
UNIPOL-1210M Metallographic Preparation System with Hot Mounting and Automatic Polishing
Combine hot mounting, abrasive changes, polishing and ultrasonic cleaning in one automated workflow. UNIPOL-1210M handles up to six samples per mounting cycle and stores up to 16 sets of grinding and polishing consumables.
EQ-SKZD-4 Four-Channel Slurry Feeder for Laboratory Polishing Machines
Deliver polishing suspension from four separate 600 mL containers with EQ-SKZD-4. Adjustable flow and timing help organize multi-stage polishing without treating the feeder as a standalone polishing machine.
LS-E-RF-01 Laboratory Melt Spinning Machine
Laboratory melt spinning system for polymer pellets or powders, with dual-zone extrusion heating up to 300°C, roller drawing and a traversing fiber winder.
MSK-530 Compact Cutter for Cylindrical Battery Case Disassembly
Open cylindrical battery cases for laboratory examination with the MSK-530 manual-feed cutter. Separate case rotation and cutting drives, a micrometer adjustment and a protective cover support controlled disassembly work by trained laboratory personnel.
PC-60F 60T Guarded Manual Pellet Press
PC-60F Guarded Manual Pellet Press. Pressing load range: 0-60T; Working space: 180 × 210 mm; Maximum piston stroke: 50 mm.
LS-GY-02 Pilot-Scale Electrospinning Machine
Pilot-scale electrospinning system with dual-electrode spinning, roll-to-roll substrate collection, up to 60 cm substrate width and a 20 L solution reservoir.
MSK-4680 Variable-Speed Cylindrical Battery Case Cutter
Match cutting and chuck speeds to the case-opening task with the MSK-4680. Interchangeable holders and 2- or 3-inch cutting-disc options serve cylindrical-cell research workflows, with a protective enclosure and separate control box.
PC-2S Two-Column 2T Digital Manual Press
PC-2S Two-Column 2T Digital Manual Press. Pressing load range: 0-2T; Working space: 85 × 120 mm; Maximum piston stroke: 30 mm.
UNIPOL-1503 Automated 15-Inch Wafer Polisher with Thickness Control
UNIPOL-1503 combines a 15-inch platen, three 4-inch sample stations and Bluetooth-enabled thickness control. A PLC and 10-inch touchscreen coordinate plate rotation and swing motion for automated wafer polishing.
PC-3S Two-Column 3T Digital Manual Press
PC-3S Two-Column 3T Digital Manual Press. Working space: 90 × 125 mm; Maximum piston stroke: 30 mm; Piston diameter: Ø50 mm.
PC-5S Two-Column 5T Digital Manual Press
PC-5S Two-Column 5T Digital Manual Press. Pressing load range: 0-5T; Working space: 90 × 125 mm; Maximum piston stroke: 30 mm.
PC-12S Two-Column 12T Digital Manual Press
PC-12S Two-Column 12T Digital Manual Press. Pressing load range: 0-12T; Working space: 96 × 130 mm; Maximum piston stroke: 30 mm.
PC-15BS Two-Column 15T Digital Manual Press
PC-15BS Two-Column 15T Digital Manual Press. Pressing load range: 0-15T; Working space: 140 × 160 mm; Maximum piston stroke: 30 mm.
PC-15S 15T Digital Manual Press
PC-15S Digital Manual Press. Pressing load range: 0-15T; Working space: 80 × 140 mm; Maximum piston stroke: 30 mm.
PC-2NS Digital Manual Coin Cell Crimper
PC-2NS Digital Manual Coin Cell Crimper. Pressing load range: 0-2T; Crimping load: Generally between 0.8 and 1.2 tons; Piston diameter: Chromed oil cylinder Ø32 mm.
PC-24S 24T Digital Manual Press
PC-24S Digital Manual Press. Pressing load range: 0-24T; Working space: 80 × 150 mm; Maximum piston stroke: 30 mm.
PC-30S 30T Digital Manual Press
PC-30S Digital Manual Press. Pressing load range: 0-30T; Working space: 92 × 160 mm; Maximum piston stroke: 30 mm.
PC-40S 40T Digital Manual Press
PC-40S Digital Manual Press. Pressing load range: 0-40T; Working space: 106 × 180 mm; Maximum piston stroke: 40 mm.
PC-15FS Digital 15T Guarded Manual Pellet Press
PC-15FS Digital 15T Guarded Manual Pellet Press. Pressing load range: 0-15T; Maximum piston stroke: 30 mm; Piston diameter: Chrome-plated cylinder Ø80 mm.
PC-24FS Digital 24T Guarded Manual Pellet Press
PC-24FS Digital 24T Guarded Manual Pellet Press. Pressing load range: 0-24T; Working space: 112 × 160 mm; Maximum piston stroke: 30 mm.
PC-30FS Digital 30T Guarded Manual Pellet Press
PC-30FS Digital 30T Guarded Manual Pellet Press. Pressing load range: 0-30T; Working space: 112 × 160 mm; Maximum piston stroke: 30 mm.
PC-40FS Digital 40T Guarded Manual Pellet Press
PC-40FS Digital 40T Guarded Manual Pellet Press. Pressing load range: 0-40T; Working space: 136 × 180 mm; Maximum piston stroke: 40 mm.
PC-60FS Digital 60T Guarded Manual Pellet Press
PC-60FS Digital 60T Guarded Manual Pellet Press. Pressing load range: 0-60T; Working space: 180 × 210 mm; Maximum piston stroke: 50 mm.
PC-F Protective Guard for Manual Pellet Presses
PC-F Protective Guard for Manual Pellet Presses. Material: Acrylic.
PP-2N Electric Coin Cell Crimper
PP-2N electric coin-cell crimper for battery laboratory assembly. The electrically driven configuration is distinct from the manually operated coin-cell crimpers.
PP-2S 2T Automatic Press
PP-2S Automatic Press. Pressing load range: 0.01-2.00 tons; Power supply: 500 W (220 V / 110 V customizable).
PP-12S 12T Automatic Press
PP-12S Automatic Press. Pressing load range: 0-12 tons; Power supply: 500 W (220 V/ 110 V customizable).
PP-20S 20T Automatic Press
PP-20S Automatic Press. Pressing load range: 0-20 tons; Power supply: 500 W (220 V / 110 V customizable).
PP-30S 30T Automatic Press
PP-30S Automatic Press. Pressing load range: 0-30 tons; Power supply: 500 W (220 V / 110 V customizable).
PP-40S 40T Automatic Press
PP-40S Automatic Press. Pressing load range: 0-40 tons; Power supply: 500 W (220 V / 110 V customizable).
PP-60S 60T Automatic Press
PP-60S Automatic Press. Pressing load range: 0-60 tons; Power supply: 500 W (220 V / 110 V customizable).
PP-100S 100T Automatic Press
PP-100S Automatic Press. Pressing load range: 0-100 tons; Power supply: 500 W (220 V/110 V customizable).
PP-150S 150T Automatic Press
PP-150S Automatic Press. Pressing load range: 0-150 tons; Power supply: 500 W (220 V/ 110 V customizable).
PCD-20S 20T Electric Press
PCD-20S Electric Press. Pressing load range: 0-20T; Working space: 112 × 160 mm; Maximum piston stroke: 30 mm.
PCD-30S 30T Electric Press
PCD-30S Electric Press. Pressing load range: 0-30T; Working space: 112 × 160 mm; Maximum piston stroke: 40 mm.
PCD-40S 40T Electric Press
PCD-40S Electric Press. Pressing load range: 0-40T; Working space: 136 × 180 mm; Maximum piston stroke: 50 mm.
PT-10 Manual Disc Cutter
PT-10 Manual Disc Cutter. Mold material: 3Cr13(Stainless steel quenching).
PCD-60S 60T Electric Press
PCD-60S Electric Press. Pressing load range: 0-60T; Working space: 180 × 210 mm; Maximum piston stroke: 50 mm.
![PCD-40S[F] 40T Split Type Electric Press](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/228db79e8d23833a26b1f5bd-card.webp)
PCD-40S[F] 40T Split Type Electric Press
PCD-40S[F] split-type electric laboratory press with a listed 40-tonne capacity. The split configuration separates the press assembly from the drive unit.
PCD-65S 65T Split Type Electric Press
PCD-65S Split Type Electric Press. Pressing load range: 0-65 ton; Display: 7 inches Touchscreen; Piston diameter: Cylinder Diameter Ø160 mm.
PCD-100S 100T Split Type Electric Press
PCD-100S Split Type Electric Press. Pressing load range: 1-100 ton; Display: 7 inches Touchscreen; Piston diameter: Chrome-Plated Cylinder Ø200 mm.
PCD-150S 150T Split Type Electric Press
PCD-150S Split Type Electric Press. Pressing load range: 1-150 ton; Display: 7 inches Touchscreen; Piston diameter: Chrome-Plated Cylinder Ø250 mm.
PCD-200S 200T Split Type Electric Press
PCD-200S Split Type Electric Press. Pressing load range: 1-200 ton; Display: 7 inches Touchscreen; Piston diameter: Chrome-Plated Cylinder Ø290 mm.
PCD-300S 300T Split Type Electric Press
PCD-300S Split Type Electric Press. Pressing load range: 1-300 ton; Display: 7 inches Touchscreen; Piston diameter: Chrome-Plated Cylinder Ø380 mm.
PP-CIP Large-diameter Cold Isostatic Press
PP-CIP Large-diameter Cold Isostatic Press. Working chamber internal diameter: 100 / 120 / 150 / 200 mm; Working chamber usable depth: 150 / 200 / 250 mm.
PP-WIP Large-diameter Warm Isostatic Press
PP-WIP Large-diameter Warm Isostatic Press. Working chamber internal diameter: 100 / 120 / 150 / 200 mm; Working chamber usable depth: 150 / 200 / 250 mm.
PMH-PEEK 200℃ Heatable Peek Cell
PMH-PEEK Heatable Peek Cell. Heating temperature: Ambient to 200°C; Indenter hardness: HRC60-HRC62; Mold material: Insulating PEEK for battery testing.
PP-BIP Multi-station Battery Isostatic Pressure Tester
PP-BIP multi-station battery isostatic pressure tester for comparing battery samples under isostatic loading. The catalogue identifies a multi-station test configuration rather than a general-purpose pellet press.
PP-20J 20T Automatic CIP Press
PP-20J Automatic CIP Press. Pressing load range: 0-20.0 tons.
PP-40J 40T Automatic CIP Press
PP-40J Automatic CIP Press. Pressing load range: 0-40.0 tons.
PP-60J 60T Automatic CIP Press
PP-60J Automatic CIP Press. Pressing load range: 0-60.0 tons.
PP-100J 100T Automatic CIP Press
PP-100J Automatic CIP Press. Pressing load range: 0-100.0 tons.
PP-20R 20T Hot Isostatic Press
PP-20R Hot Isostatic Press. Pressing load range: 0-20 tons.
PP-40R 40T Hot Isostatic Press
PP-40R Hot Isostatic Press. Pressing load range: 0-40 tons.
PP-60R 60T Hot Isostatic Press
PP-60R Hot Isostatic Press. Pressing load range: 0-60 tons.
PC-12J 12T Manual CIP Press
PC-12J Manual CIP Press. Pressing load range: 0-12T; Maximum piston stroke: 40 mm.
PC-20J 20T Manual CIP Press
PC-20J Manual CIP Press. Pressing load range: 0-20T; Maximum piston stroke: 40 mm; Piston diameter: Chrome-plated cylinder Ø110 mm.
PC-40J 40T Manual CIP Press
PC-40J Manual CIP Press. Pressing load range: 0-40T; Maximum piston stroke: 40 mm; Piston diameter: Chrome-plated cylinder Ø130 mm.
PMN-Q Disc Cutting Dies
PMN-Q Disc Cutting Dies. Mold material: 3Cr13 (Stainless Steel Quenched); Overall dimensions: Ø60 × 100 mm.
PC-60J 60T Manual CIP Press
PC-60J Manual CIP Press. Pressing load range: 0-60T; Maximum piston stroke: 50 mm; Piston diameter: Chrome-plated cylinder Ø150 mm.
PCD-12J 12T Manual+Electric CIP Press
PCD-12J Manual+Electric CIP Press. Maximum piston stroke: 40 mm; Display: 4.3 - inches Touchscreen; Piston diameter: Chrome-plated cylinder Ø95 mm.
PCD-20J 20T Manual+Electric CIP Press
PCD-20J Manual+Electric CIP Press. Pressing load range: 0-20T; Maximum piston stroke: 40 mm; Display: 4.3- inches Touchscreen.
PCD-40J 40T Manual+Electric CIP Press
PCD-40J Manual+Electric CIP Press. Pressing load range: 0-40T; Maximum piston stroke: 50 mm; Display: 4.3 inches Touchscreen.
PCD-60J 60T Manual+Electric CIP Press
PCD-60J Manual+Electric CIP Press. Maximum piston stroke: 50 mm; Display: 4.3 inches Touchscreen; Piston diameter: Chrome-plated cylinder Ø150 mm.
PCD-65J 65T Electric CIP Press
PCD-65J Electric CIP Press. Pressing load range: 0-65 tons.
PCD-100J 100T Electric CIP Press
PCD-100J Electric CIP Press. Pressing load range: 0-100 tons.
PCD-150J 150T Electric CIP Press
PCD-150J Electric CIP Press. Pressing load range: 0-150 tons.
PCD-200J 200T Electric CIP Press
PCD-200J Electric CIP Press. Pressing load range: 0-200 tons.
PCD-300J 300T Electric CIP Press
PCD-300J Electric CIP Press. Pressing load range: 0-300 tons.
PMN-A Crimping Dies
PMN-A Crimping Dies. Crimping load: Generally between 0.8 and 1.2 tons; Overall dimensions: Ø60 × 140 mm.
PCD-65R 65T Hot Isostatic Press
PCD-65R Hot Isostatic Press. Pressing load range: 0-65T; Heating temperature: Ambient to 300°C.
PCD-100R 100T Hot Isostatic Press
PCD-100R Hot Isostatic Press. Pressing load range: 0-100T; Heating temperature: Ambient to 300°C.
PCD-150R 150T Hot Isostatic Press
PCD-150R Hot Isostatic Press. Pressing load range: 0-150T; Heating temperature: Ambient to 200°C.
PCD-200R 200T Hot Isostatic Press
PCD-200R Hot Isostatic Press. Pressing load range: 0-200T; Heating temperature: Ambient to 200°C.
PCD-300R 300T Hot Isostatic Press
PCD-300R Hot Isostatic Press. Pressing load range: 0-300T; Heating temperature: Ambient to 150°C.
![PC-600D1 Double Plate Hot Press[180mm] - Guarded Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/4a7768c1cb65ef45dcf855cb-card.webp)
PC-600D1 Double Plate Hot Press[180mm] - Guarded Version
PC-600D1 Double Plate Hot Press - Guarded Version. Pressing load range: 0-10.0T; Working space: 180 × 55 mm; Display: 7-inch touchscreen.
![PC-600D2 Double Plate Hot Press[200mm] - Guarded Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/cde43145d55045efdf32ac72-card.webp)
PC-600D2 Double Plate Hot Press[200mm] - Guarded Version
PC-600D2 Double Plate Hot Press - Guarded Version. Pressing load range: 0-10.0T; Working space: 180 × 55 mm; Display: 7-inch touchscreen.
![PC-600E Double Plate Hot Press[300mm] - Guarded Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/b01759a38b7f582c826b0ea3-card.webp)
PC-600E Double Plate Hot Press[300mm] - Guarded Version
PC-600E Double Plate Hot Press - Guarded Version. Pressing load range: 0-15.0 T; Working space: 300 × 65 mm; Display: 7-inch touchscreen.
![PP-600D1-F Automatic Hot Press[180mm] - Guarded Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/7daee66d5f8ec9cdc6b5b352-card.webp)
PP-600D1-F Automatic Hot Press[180mm] - Guarded Version
PP-600D1-F Automatic Hot Press - Guarded Version. Pressing load range: 0.01-25 T; Heating platen dimensions: 180 × 180 mm; Working space: 210 × 65 mm.
PMN-B Disassembling Dies
PMN-B Disassembling Dies. Crimping load: Generally within 0.4 tons; Overall dimensions: Ø60 × 140 mm.
![PP-600D2-F Automatic Hot Press[200mm] - Guarded Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/29de52f2bb2542b6fd1815cf-card.webp)
PP-600D2-F Automatic Hot Press[200mm] - Guarded Version
PP-600D2-F Automatic Hot Press - Guarded Version. Pressing load range: 0.01-25 T; Heating platen dimensions: 200 × 200 mm; Working space: 210 × 65 mm.
![PP-600E-F Automatic Hot Press[300mm] - Guarded Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/64c6d01a5c5721eaf67fd660-card.webp)
PP-600E-F Automatic Hot Press[300mm] - Guarded Version
PP-600E-F Automatic Hot Press - Guarded Version. Pressing load range: 0.01-30 T; Heating platen dimensions: 300 × 300 mm; Working space: 320 × 70 mm.
![PP-600F-F Automatic Hot Press[400mm] - Guarded Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/fc7262300bf304cab2caa7de-card.webp)
PP-600F-F Automatic Hot Press[400mm] - Guarded Version
PP-600F-F Automatic Hot Press - Guarded Version. Pressing load range: 0.01-50 T; Working space: 420 × 90 mm; Display: 7- inches Touch Screen.
![PP-600G-F Automatic Hot Press[500mm] - Guarded Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/c525fccda6edbcff2ac605b9-card.webp)
PP-600G-F Automatic Hot Press[500mm] - Guarded Version
PP-600G-F Automatic Hot Press - Guarded Version. Pressing load range: 0.01-60 T; Heating platen dimensions: 500 × 500 mm; Working space: 520 × 100 mm.
PC-600ZC Manual Vacuum Hot Press
PC-600ZC Manual Vacuum Hot Press. Pressing load range: 0-5T; Heating platen dimensions: 120 × 120 mm; Working space: 120 × 55 mm.
PC-600ZD Manual Vacuum Hot Press
PC-600ZD Manual Vacuum Hot Press. Pressing load range: 0-10 T; Heating platen dimensions: 180 × 180 mm / 200 × 200 mm; Working space: 210 × 65 mm.
PC-600ZE Manual Vacuum Hot Press
PC-600ZE Manual Vacuum Hot Press. Pressing load range: 0-15T; Heating platen dimensions: 300 × 300 mm; Working space: 300 × 70 mm.
PP-600ZC Automatic Vacuum Hot Press
PP-600ZC Automatic Vacuum Hot Press. Pressing load range: 0.01-5.0T; Heating platen dimensions: 120 × 120 mm; Working space: 130 × 55 mm.
PP-600ZD Automatic Vacuum Hot Press
PP-600ZD Automatic Vacuum Hot Press. Pressing load range: 0.01-25 T; Heating platen dimensions: 180 × 180 mm / 200 × 200 mm; Working space: 210 × 65 mm.
PP-600ZE Automatic Vacuum Hot Press
PP-600ZE Automatic Vacuum Hot Press. Pressing load range: 0.01-30 T; Heating platen dimensions: 300 × 300 mm; Working space: 320 × 70 mm.
PMN-P Flat Coin Cell Dies
PMN-P Flat Coin Cell Dies. Overall dimensions: Ø60 × 140 mm.
PP-600ZF Automatic Vacuum Hot Press
PP-600ZF Automatic Vacuum Hot Press. Pressing load range: 0.01-50 T; Heating platen dimensions: 400 × 400 mm; Working space: 420 × 90 mm.
PP-900L Automatic Hot Press Machine
PP-900L automatic hot press for laboratory pressing with heat. This listing identifies the automatic hot-press configuration; the source specification sheet carries a different model number and is not used to assert operating limits.
![PC-600C Double Plate Hot Press[120mm] - Compact Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/e98db9e8652bc4bc7bdff0c7-card.webp)
PC-600C Double Plate Hot Press[120mm] - Compact Version
PC-600C Double Plate Hot Press - Compact Version. Pressing load range: 0-5.0T; Working space: 120 × 50 mm; Display: 5-inch touchscreen.
![PC-600D1 Double Plate Hot Press[180mm] - Compact Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/b6e67635eb524dfb81804e33-card.webp)
PC-600D1 Double Plate Hot Press[180mm] - Compact Version
PC-600D1 Double Plate Hot Press - Compact Version. Pressing load range: 0-10.0T; Working space: 180 × 55 mm; Display: 7-inch touchscreen.
![PC-600D2 Double Plate Hot Press[200mm] - Compact Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/b8367bd8b223061384063e78-card.webp)
PC-600D2 Double Plate Hot Press[200mm] - Compact Version
PC-600D2 Double Plate Hot Press - Compact Version. Pressing load range: 0-10.0 T; Working space: 200 × 55 mm; Display: 7-inch touchscreen.
![PC-600E Double Plate Hot Press[300mm] - Compact Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/6775889f174170938105899e-card.webp)
PC-600E Double Plate Hot Press[300mm] - Compact Version
PC-600E Double Plate Hot Press - Compact Version. Pressing load range: 0-15.0T; Working space: 300 × 65 mm; Display: 7-inch touchscreen.
![PC-600F Double Plate Hot Press[400mm] - Compact Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/083ece376a2d73c3ae169f46-card.webp)
PC-600F Double Plate Hot Press[400mm] - Compact Version
PC-600F Double Plate Hot Press - Compact Version. Pressing load range: 0-15.0 T; Working space: 400 × 70 mm; Display: 7-inch touchscreen.
![PP-600C Automatic Hot Press[120mm] - Compact Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/48c41f971808502bdc8a9c92-card.webp)
PP-600C Automatic Hot Press[120mm] - Compact Version
PP-600C Automatic Hot Press - Compact Version. Pressing load range: 0.01-5.0T; Working space: 140 × 50 mm; Display: 7-inch touchscreen.
![PP-600D1 Automatic Hot Press[180mm] - Compact Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/11da8f8f170cfe74682ff07b-card.webp)
PP-600D1 Automatic Hot Press[180mm] - Compact Version
PP-600D1 Automatic Hot Press - Compact Version. Pressing load range: 0.01-25.0T; Working space: 200 × 60 mm; Display: 7-inch touchscreen.
![PP-600D2 Automatic Hot Press[200mm] - Compact Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/ae5037473de56630f58932c2-card.webp)
PP-600D2 Automatic Hot Press[200mm] - Compact Version
PP-600D2 Automatic Hot Press - Compact Version. Pressing load range: 0.01-25.0 T; Working space: 200 × 60 mm; Display: 7-inch touchscreen.
PMN-C Crimping / Disassembling Dies
PMN-C Crimping / Disassembling Dies. Crimping load: Generally within 1 ton.
![PP-600E Automatic Hot Press[300mm] - Compact Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/f1671075b6dac5b496bfe045-card.webp)
PP-600E Automatic Hot Press[300mm] - Compact Version
PP-600E Automatic Hot Press - Compact Version. Pressing load range: 0.01-30.0 T; Working space: 300 × 70 mm; Display: 7-inch touchscreen.
![PP-600F Automatic Hot Press[400mm] - Compact Version](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/f434fa10344c0e0cadc76d8e-card.webp)
PP-600F Automatic Hot Press[400mm] - Compact Version
PP-600F Automatic Hot Press - Compact Version. Pressing load range: 0.01-50.0 T; Working space: 400 × 80 mm; Display: 7-inch touchscreen.
PCH-600A Pellet Hot Press
PCH-600A Pellet Hot Press. Pressing load range: 0-15T; Piston diameter: Chrome-Plated Oil Cylinder Ø80 mm; Power supply: 220 V / 110 V Customizable.
PCH-600B Single Plate Hot Press
PCH-600B Single Plate Hot Press. Pressing load range: 0-24T; Mold dimensions: Single Flat Plate Heating 100 × 100 mm; Piston diameter: Chrome-Plated Oil Cylinder Ø95 mm.
![PCH-600C1 Manual Hot Press[100mm]](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/da4f26fca9dfdfc818ef1903-card.webp)
PCH-600C1 Manual Hot Press[100mm]
PCH-600C1 Manual Hot Press. Pressing load range: 0-30T; Mold dimensions: 100 × 100 mm; Working space: 112 × 130 mm.
![PCH-600C2 Manual Hot Press[120mm]](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/4b6f392b64cccdd6396e591c-card.webp)
PCH-600C2 Manual Hot Press[120mm]
PCH-600C2 Manual Hot Press. Pressing load range: 0-40T; Mold dimensions: 120 × 120 mm; Working space: 136 × 130 mm.
![PCH-600D1 Manual Hot Press[180mm]](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/84d1c635362bc870663243c2-card.webp)
PCH-600D1 Manual Hot Press[180mm]
PCH-600D1 Manual Hot Press. Pressing load range: 0-60T; Mold dimensions: 180 × 180 mm; Working space: 180 × 190 mm.
![PCH-600D2 Manual Hot Press[200mm]](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/34110d8c043751d45344eca9-card.webp)
PCH-600D2 Manual Hot Press[200mm]
PCH-600D2 Manual Hot Press. Pressing load range: 0-30T; Mold dimensions: 200 × 200 mm; Working space: 180 × 190 mm.
![PCH-600E Manual Hot Press[300mm]](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/12d1c58c01a18890273cb2c2-card.webp)
PCH-600E Manual Hot Press[300mm]
PCH-600E Manual Hot Press. Pressing load range: 0-40T; Mold dimensions: 300 × 300 mm; Working space: 300 × 220 mm.
![PCH-600F Manual Hot Press[400mm]](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/43c425071deb029667b48f32-card.webp)
PCH-600F Manual Hot Press[400mm]
PCH-600F Manual Hot Press. Pressing load range: 0-40T; Mold dimensions: 400 × 400 mm; Working space: 400 × 220 mm.
![PCD-600E Split Type Hot Press[300mm]](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/814bccd6a5ea2d32efcf8485-card.webp)
PCD-600E Split Type Hot Press[300mm]
PCD-600E Split Type Hot Press. Pressing load range: 0-40T; Mold dimensions: 300 × 300 mm; Working space: 300 × 220 mm.
PMN-PK PEEK Cell
PMN-PK PEEK Cell. Sample size: Ø10, Ø12, Ø12.7, Ø13, Ø20 mm; Mold material: Insulating PEEK; Cavity depth: 30 mm.
![PCD-600F Split Type Hot Press[400mm]](https://cdn.labsova.com/products/tianjin17/labsova-neutral-20261022/6142b8357914a0ad9957ee79-card.webp)
PCD-600F Split Type Hot Press[400mm]
PCD-600F Split Type Hot Press. Pressing load range: 0-40T; Mold dimensions: 400 × 400 mm; Working space: 400 × 220 mm.
PR-Table Hot Press Matching Laboratory Table
PR-Table Hot Press Matching Laboratory Table. Material: 45# Sheet Metal.
PP-30X 30T Automatic XRF Press
PP-30X Automatic XRF Press. Pressing load range: 0-30 tons; Mold material: Stainless steel 440C tool steel; Power supply: 500 W (220 V/ 110 V customizable).
PP-40X 40T Automatic XRF Press
PP-40X Automatic XRF Press. Pressing load range: 0-40 tons; Mold dimensions: Ø40 mm / Ø32 mm (1 set of built-in molds); Mold material: Stainless steel 440C tool steel.
PP-60X 60T Automatic XRF Press
PP-60X Automatic XRF Press. Pressing load range: 0-60 tons; Mold dimensions: Ø40 mm / Ø32 mm (1 set of built-in molds); Mold material: Stainless steel 440C tool steel.
PX-40 40T Automatic XRF Press
PX-40 Automatic XRF Press. Control mode: Touchscreen with PLC program control; Optional mold types: Boric acid edging, aluminum cup, steel ring or plastic ring.
PX-60 60T Automatic XRF Press
PX-60 Automatic XRF Press. Control mode: Touchscreen with PLC program control; Optional mold types: Boric acid edging, aluminum cup, steel ring or plastic ring.
PM-PRO CNC Dial-Controlled Grinding Machine
PM-PRO CNC dial-controlled grinding machine for laboratory sample preparation. This is the dial-control configuration in the grinding equipment range.
PM-PLUS Touchscreen Disc Grinding Machine
PM-PLUS touchscreen disc grinding machine for laboratory sample preparation. Touchscreen operation distinguishes this configuration from the dial-controlled model.
PMN-JA Pressure-Controlled Battery Fixture, Small
PMN-JA Pressure-Controlled Battery Fixture, Small. Load display range: 0-5000 kg; Sample size: Ø10, Ø12, Ø12.7, Ø13, Ø20 mm; Mold dimensions: Ø50 × 90 mm.
PMP-Z Boric Acid Pressing Dies
PMP-Z Boric Acid Pressing Dies. Steel ring size: Ø51.5-Ø40 mm / Ø40-Ø32 mm /Ø32-Ø24 mm; Boric acid die size: Ø32, Ø40 mm.
PMP Boric Acid Pressing Dies
PMP Boric Acid Pressing Dies. Sample size: Ø32, Ø40 mm; Indenter hardness: HRC60-HRC62; Mold material: 440C.
PMG Steel Ring Pressing Dies
PMG Steel Ring Pressing Dies. Sample size: Ø32, Ø40, Ø10 mm; Indenter hardness: HRC60-HRC62; Mold material: 440C.
PMG-L Steel Ring Pressing Dies
PMG-L steel-ring pressing die for XRF sample preparation. The tooling forms samples in a supporting steel ring rather than as unsupported pellets.
PMB-A Plastic Mold
PMB-A Plastic Mold. Heating platen dimensions: Ø65 × 16 × 195; Sample size: Ø40, Ø300 mm; Indenter hardness: HRC60-HRC62.
PML-L Aluminum Cup Die for XRF Sample Preparation
PML-L aluminum-cup die for XRF sample preparation. Designed for the aluminum-cup sample format used to support pressed powder specimens.
XRF-G Stainless Steel Ring
XRF-G stainless-steel sample ring for XRF pellet preparation. The ring serves as the supporting sample format when used with matching ring-press tooling.
XRF-L Aluminum Ring
XRF-L aluminum sample ring for XRF preparation. This is the aluminum-ring consumable in the sample-support range, separate from the stainless-steel and plastic versions.
XRF-S Plastic Ring
XRF-S plastic sample ring for XRF preparation. The plastic ring supports the sample format used with corresponding pellet preparation tooling.
PMY-A Φ3-6 Pellet Press Dies
PMY-A Pellet Press Dies. Indenter hardness: HRC68-70; Mold material: Japan High-Speed Tool Steel ASSAB+17; Cavity depth: 20 mm.
PMN-JB Pressure-Controlled Battery Fixture, Medium
PMN-JB Pressure-Controlled Battery Fixture, Medium. Load display range: 0-5000 kg; Sample size: Ø10, Ø12, Ø12.7, Ø13, Ø20 mm; Mold dimensions: Ø50 × 90 mm.
PMY-B Φ7-14 Pellet Press Dies
PMY-B Pellet Press Dies. Indenter hardness: HRC68-70; Mold material: Japan High-Speed Tool Steel ASSAB+17; Cavity depth: 30 mm.
PMY-C Φ15-25 Pellet Press Dies
PMY-C Pellet Press Dies. Sample size: Ø15, Ø16, Ø17, Ø18, Ø19, Ø20, Ø21, Ø22, Ø23, Ø24, Ø25 mm; Indenter hardness: HRC60-62; Mold material: 440C.
PMY-D Φ26-40 Pellet Press Dies
PMY-D Pellet Press Dies. Indenter hardness: HRC60-62; Mold material: 440C; Cavity depth: 45 mm.
PMY-E Φ41-70 Pellet Press Dies
PMY-E Pellet Press Dies. Sample size: Ø50, Ø60, Ø70 mm; Indenter hardness: HRC60-HRC62; Mold material: Alloy Tool Steel:Cr12MoV.
PMY-F Φ71-100 Pellet Press Dies
PMY-F Pellet Press Dies. Sample size: Ø80, Ø90, Ø100 mm; Indenter hardness: HRC60-HRC62; Mold material: Alloy Tool Steel:Cr12MoV.
PMY-G Φ101-150 Pellet Press Dies
PMY-G Pellet Press Dies. Sample size: Ø120, Ø150 mm; Indenter hardness: HRC60-HRC62; Mold material: Alloy Tool Steel:Cr12MoV.
PMF-A 3-10mm Square Press Dies
PMF-A Square Press Dies. Sample size: Length: 3-10 mm; Indenter hardness: HRC60-62; Mold material: 440C.
PMF-B 11-20mm Square Press Dies
PMF-B Square Press Dies. Sample size: Length: 11-20 mm; Indenter hardness: HRC60-62; Mold material: 440C.
PMF-C 21-30mm Square Press Dies
PMF-C Square Press Dies. Sample size: Length: 21-30 mm; Indenter hardness: HRC60-62; Mold material: 440C.
PMF-D 31-40mm Square Press Dies
PMF-D Square Press Dies. Sample size: Length: 31-40 mm; Indenter hardness: HRC60-62; Mold material: 440C.
PMF-E 41-80mm Square Press Dies
PMF-E Square Press Dies. Sample size: Length: 41-80 mm; Indenter hardness: HRC60-62; Mold material: Alloy tool steel: Cr12MoV.
PMN-JC Pressure-Controlled Battery Fixture, Large
PMN-JC Pressure-Controlled Battery Fixture, Large. Load display range: 0-5000 kg; Sample size: Ø10, Ø12, Ø12.7, Ø13, Ø20 mm; Mold dimensions: Ø50 × 90 mm.
PMF-PA 81-150mm Square Press Dies
PMF-PA Square Press Dies. Sample size: Long side81-150 mm; Indenter hardness: HRC60-HRC62; Mold material: Alloy tool steel: Cr12MoV.
PMF-PB 151-200mm Square Press Dies
PMF-PB Square Press Dies. Sample size: Long side151-200 mm; Indenter hardness: HRC60-HRC62; Mold material: Alloy tool steel: Cr12MoV.
PMK-YA Φ3-6 Assemble Press Dies
PMK-YA Assemble Press Dies. Indenter hardness: HRC68-HRC70; Mold material: Japanese High-Speed Tool Steel ASSAB+17; Cavity depth: 30 mm.
PMK-YB Split Cylindrical Pellet Press Die
PMK-YB Split Cylindrical Pellet Press Die. Sample size: Ø7, Ø8, Ø9, Ø10, Ø11, Ø12, Ø12, Ø14 mm; Indenter hardness: HRC60-HRC62; Mold material: 440C.
PMK-YC Φ15-25 Assemble Press Dies
PMK-YC split cylindrical pellet pressing die, listed for 15-25 mm sample diameters. The separable die construction is intended for cylindrical sample forming and demolding.
PMK-YD Φ26-40 Assemble Press Dies
PMK-YD Assemble Press Dies. Indenter hardness: HRC60-HRC62; Mold material: 440C; Cavity depth: 50 mm.
PMK-YE Φ51-80 Assemble Press Dies
PMK-YE Assemble Press Dies. Indenter hardness: HRC60-HRC62; Mold material: Alloy tool steel : Cr12MoV; Cavity depth: 60 mm.
PMK-FA 3-10mm Square Assemble Dies
PMK-FA Square Assemble Dies. Sample size: Length:3-10 mm; Indenter hardness: HRC60 - HRC62; Mold material: 440C.
PMK-FB 11-20mm Square Assemble Dies
PMK-FB Square Assemble Dies. Sample size: Length:11-20 mm; Indenter hardness: HRC60 - HRC62; Mold material: 440C.
PMK-FC 21-40mm Square Assemble Dies
PMK-FC Square Assemble Dies. Sample size: Length: 21-40 mm; Indenter hardness: HRC60 - HRC62; Mold material: 440C.
PMN-YX Pressure Display Instrument
PMN-YX Pressure Display Instrument. Load display range: 0-5000 kg; Overall dimensions: 128 × 30 × 65 mm.
PMK-FD 41-60mm Square Assemble Dies
PMK-FD Square Assemble Dies. Sample size: Length:41-60 mm; Indenter hardness: HRC60 - HRC62; Mold material: 440C.
PMK-FE 61-80mm Square Assemble Dies
PMK-FE Square Assemble Dies. Sample size: Length: 60-80 mm; Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV.
PMO-A Φ3-40 Ring Press Dies
PMO-A ring-shaped sample pressing die, listed for the 3-40 mm size range. This tooling forms annular specimens rather than solid cylindrical pellets.
PMO-B Φ41-80 Ring Press Dies
PMO-B Ring Press Dies. Sample size: Ø41-80 mm; Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV.
PMQ-A Φ3-40 Ball Press Dies
PMQ-A Ball Press Dies. Sample size: Ø5-40 mm; Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV.
PMQ-B Φ41-80 Ball Press Dies
PMQ-B Ball Press Dies. Sample size: Ø41-80 mm; Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV.
PMW-A Cemented Carbide Pellet Press Die
PMW-A Cemented Carbide Pellet Press Die. Sample size: Ø5 ~ 10 mm; Indenter hardness: HRC85 - HRC90; Mold material: Alloy tool steel: YT15.
PMW-B Cemented Carbide Pellet Press Die
PMW-B Cemented Carbide Pellet Press Die. Sample size: Ø14~20 mm; Indenter hardness: HRC85 - HRC90; Mold material: Alloy tool steel: YT15.
PMW-C Φ21-30 Alloy Dies
PMW-C Alloy Dies. Sample size: Ø21 ~30 mm; Indenter hardness: HRC85 - HRC90; Mold material: Cemented carbide YT15.
PMD Polygon Shape Pressing Dies
PMD Polygon Shape Pressing Dies. Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV; Cavity depth: 40 mm.
PMT Special Shape Pressing Dies
PMT Special Shape Pressing Dies. Sample size: Ø5~40 mm; Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV.
PML Anti-cracking Dies
PML Anti-cracking Dies. Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV; Cavity depth: 40 mm.
PMC Die with scale
PMC Die with scale. Sample size: Ø10, Ø12, Ø13, Ø15, Ø18, Ø20 mm; Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV.
PMM Porous Pressing Dies
PMM Porous Pressing Dies. Sample size: 10 × 10 mm; Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV.
PMS-P Bidirectional Pressing Die
PMS-P bidirectional pressing die for laboratory sample forming. The die is designed for loading from opposing directions rather than single-direction pressing.
PMS-KY Bidirectional Split Cylindrical Pressing Die
PMS-KY bidirectional split cylindrical pressing die. It combines a separable cylindrical die body with opposing-direction loading for laboratory sample forming.
PMS-KF Bidirectional Split Square Pressing Die
PMS-KF bidirectional split square pressing die. The square, separable tooling provides an alternative to cylindrical dies for bidirectional sample pressing.
PMU Patterned Pressing Die
PMU Patterned Pressing Die. Sample size: Custom shape; Indenter hardness: HRC60-62; Mold material: 440C.
PMZ Zirconia Pressing Dies
PMZ Zirconia Pressing Dies. Indenter hardness: HRC60-62; Mold material: Zirconia; Cavity depth: 45 mm.
PMK-DF Multi-Sample Split Pressing Die
PMK-DF multi-sample split pressing die for laboratory specimen preparation. Multiple sample positions and a separable die body distinguish it from a single-cavity die.
PMF-Y long cylindrical mold
PMF-Y long cylindrical mold. Sample size: Custom shape; Indenter hardness: HRC60 - HRC62; Mold material: 440C.
PMB Flat Cylindrical Pressing Die
PMB flat cylindrical pressing die for forming round, flat laboratory specimens. It is part of the pellet and shaped-sample tooling range.
PM-YL Dumbbell-shaped specimen mold
PM-YL Dumbbell-shaped specimen mold. Sample size: Custom shape; Indenter hardness: HRC60 - HRC62; Mold material: 440C.
PMY-DT Titanium-coated circular mold
PMY-DT titanium-coated circular mold for laboratory sample pressing. This is the coated circular-tooling option in the pellet-die range.
PM-QT Isostatic pressure chamber
PM-QT isostatic pressure chamber for laboratory pressing systems. The chamber is the pressure-containing tooling component, not a complete standalone press.
PM-XJ Rubber forming mold
PM-XJ rubber forming mold for laboratory sample preparation. This listing covers the flexible forming mold rather than the hydraulic press used to apply the load.
PCH-M 300℃ Heatable Pressing Dies
PCH-M heatable pressing die with a listed 300°C configuration. The tooling combines sample forming with heating for laboratory hot-press preparation.
PCH-G 500℃ Heatable Pressing Dies
PCH-G Heatable Pressing Dies. Heating temperature: Ambient to 500°C; Indenter hardness: HRC60-HRC62; Mold material: Alloy tool steel: 440C.
PCH-P 300℃ Platen Heatable Dies
PCH-P platen heating die with a listed 300°C configuration. Flat heated tooling is provided for platen-based laboratory sample pressing.
PCH-H 500℃ Platen Heatable Dies
PCH-H platen heating die with a listed 500°C configuration. It is the higher-temperature platen-tooling option in this heating-die range.
PMY-R Thin Pellet Press Dies
PMY-R Thin Pellet Press Dies. Heating temperature: Temperature resistance < 500°C; Sample size: Ø40 mm; Indenter hardness: HRC60-HRC62.
PMF-R Thin Square Press Dies
PMF-R Thin Square Press Dies. Heating temperature: Temperature resistance up to 500°C; Sample size: 20 × 80 mm; Indenter hardness: HRC>60.
PCH-F Hot-Press Shaping Platen Die
PCH-F Hot-Press Shaping Platen Die. Heating temperature: Ambient to 500°C; Mold material: 304(Stainless Steel); Overall dimensions: 80 × 80 mm, 180 × 180 mm, 200 × 200 mm.
PCH-H Hot-Press Shaping Platen Die
PCH-H Hot-Press Shaping Platen Die. Heating temperature: Ambient to 500°C; Mold material: 304(Stainless Steel); Overall dimensions: 80 × 80 mm, 180 × 180 mm, 200 × 200 mm.
PCH-SP Water Cooled Cooling Plate
PCH-SP Water Cooled Cooling Plate. Overall dimensions: Ø105 × 40 mm.
PC-2T 2 T Screw-Operated Pellet Press
PC-2T Screw-Operated Pellet Press. Pressing load range: 0-2T (0-20 MPa); Working space: 54 × 55; Maximum piston stroke: 5 mm.
PMH-A 13mm FTIR, KBr Powder Dies
PMH-A FTIR, KBr Powder Dies. Sample size: Ø13 mm; Indenter hardness: HRC72-HRC75; Mold material: Cemented carbide YT15.
PMH-B 13mm FTIR, KBr Powder Dies
PMH-B FTIR, KBr Powder Dies. Sample size: Ø13 mm; Indenter hardness: HRC72-HRC75; Mold material: Cemented carbide YT15.
PMH-C 7mm FTIR, KBr Powder Dies
PMH-C FTIR, KBr Powder Dies. Sample size: Ø7 mm; Indenter hardness: HRC72-HRC75; Mold material: Cemented carbide YT15.
PMH-D 3mm FTIR, KBr Powder Dies
PMH-D FTIR, KBr Powder Dies. Sample size: Ø3 mm; Indenter hardness: HRC60-HRC62; Mold material: 440C.
PMH-D FTIR Pellet Press Die
PMH-D FTIR pellet pressing die for preparing compact samples for infrared analysis. This listing covers the die tooling, not a complete FTIR spectrometer.
PMD-R Heatable Round Dosing Mold
PMD-R Heatable Round Dosing Mold. Heating temperature: Ambient to 300°C; Sample size: Ø25 mm; Mold material: Alloy tool steel.
PMH-600A FTIR Flat Heating Dies
PMH-600A FTIR Flat Heating Dies. Heating temperature: 0-300°C / 400°C dual-channel heating; Mold material: 440C stainless steel; Overall dimensions: 200 × 60 mm.
PMH-600B FTIR Quantitative Heating Dies
PMH-600B FTIR Quantitative Heating Dies. Heating temperature: 0-300°C / 400°C dual-channel heating; Mold material: 440C stainless steel; Overall dimensions: 200 × 60 mm.
HF-7 Demountable Liquid Cell
HF-7 Demountable Liquid Cell. Dimensions: Ø32 × 4 mm.
HF-8 Sealed Liquid Cell
HF-8 Sealed Liquid Cell. Dimensions: 13 × 20 mm.
HW-11 Infrared Gas Cell
HW-11 infrared gas cell for gas-sample measurement by infrared spectroscopy. It is a sampling accessory rather than a standalone spectrometer.
HW-12 Heated Infrared Gas Cell
HW-12 heated infrared gas cell for gas-sample spectroscopy. The heated-cell configuration distinguishes it from the unheated gas-cell accessory.
HW-10A Infrared Flow Cell
HW-10A infrared flow cell for measurements using a flowing sample. It is an optical sampling accessory for an infrared spectroscopy setup.
HW-BJ Variable-angle transmission accessory
HW-BJ variable-angle transmission accessory for infrared spectroscopy. The adjustable transmission geometry allows measurements at different sample angles.
HWJ-1 Magnetic Film Sample Rack
HWJ-1 Magnetic Film Sample Rack. Dimensions: Ø13 mm.
HWJ-2 Universal Sample Rack
HWJ-2 Universal Sample Rack. Dimensions: Ø13-32 mm.
HWJ-3 Colorimetric Plate Rack
HWJ-3 Colorimetric Plate Rack. Cuvette dimensions: 10-40 mm in length.
HWJ-6 Lock-type Sample Holder
HWJ-6 locking sample holder for infrared spectroscopy. The locking arrangement secures the sample holder within the measurement setup.
HWJ-7 Slide Sample Clip/Holder
HWJ-7 slide sample clip for infrared spectroscopy. The holder is designed for slide-format samples rather than a liquid or gas cell.
HWJ-9 Polystyrene Film
HWJ-9 polystyrene film accessory for infrared spectroscopy. This listing provides the film sample used with the spectroscopy accessory range.
HW-JS Infrared ATR Reflection Accessory
HW-JS ATR reflection accessory for infrared spectroscopy. The ATR sampling format measures a sample through contact with an internal-reflection element rather than a transmission cell.
HW-10A Infrared Electronic Dry Cabinet
HW-10A electronic dry cabinet for storing infrared spectroscopy accessories. The cabinet provides storage separately from the instrument measurement compartment.
HF-5A Infrared Colorimetric Dish
HF-5A Infrared Colorimetric Dish. Capacity: 7 ml; Optical path: 10 mm-40 mm; Wavelength range: 200nm-2500nm.
HW-3A Infrared Oven
HW-3A Infrared Oven. Capacity: 32 L; Overall dimensions: 507 × 382 × 308 mm.
HWD-240 Infrared Baking Lamp
HWD-240 Infrared Baking Lamp. Power supply: 220 V 50 Hz.