B2B研究設備調達 サプライヤー調整 · 技術確認 · 輸出サポート
電界紡糸・繊維作製装置

LS-LX-01 Continuous Electrospinning Collection System

モデルLS-LX-01

Roll-to-roll electrospinning collection system with up to 30 needles, adjustable collection width up to 300 mm and continuous substrate transport at 1-300 cm/min.

High-voltage range 0 to +30.00 kV
Collection speed 1-300 cm/min
Spinning width 0-300 mm
  • 最終構成は見積前に確認
  • 用途に応じてカスタムと付属品を確認
  • 輸出梱包と書類は必要に応じて対応
代表的な用途
  • Continuous nanofiber membrane collection
  • Three-layer sandwich structures
設備の特徴

主な製品特徴

  • Roll-to-roll substrate collection

  • Provision for a third protective substrate layer

  • Adjustable 1-30 needle arrangement

  • Touchscreen and mechanical-button operation

技術データ

技術仕様

仕様はシステム別に整理され、設備タイプごとに重要なパラメータを表示します。

Electrical and high voltage

High-voltage range 0 to +30.00 kV
Stated voltage precision 0.01 kV
High-voltage current 0-1 mA (load dependent)
Voltage drift ≤0.1%/h; ≤0.1%/°C

Solution feeding

Flow range 0.01-999.99 mL/h
Syringe volumes 5, 10, 20, 30, 60, 100 mL
Needle arrangement 1-30 needles; 18-25G

General specifications

Controls 4.3-inch touchscreen with stylus and mechanical buttons
Power supply 220 V AC, 50 Hz
Dimensions 1200 × 400 × 500 mm
Weight 25 kg

Collection and motion

Spinning height 8-15 cm; manual adjustment
Collection speed 1-300 cm/min
Stated collection speed precision 1 cm/min
Spinning width 0-300 mm
Traverse speed 1-2500 mm/min
Traverse distance 0-30 cm

仕様は構成やカスタム内容により変更される場合があります。最終データは確認済み見積に従います。

Roll-to-roll collection

  • The substrate carries the collected fibers through the winding system. A reserved third-layer reel supports protective sandwich structures. Current-limiting and short-circuit protection are listed.