電界紡糸・繊維作製装置
LS-SF-03 Laboratory Wet Spinning Line
モデルLS-SF-03
Laboratory wet spinning line integrating dual-channel metering, a temperature-controlled coagulation bath, washing, three drawing stages, drying and fiber winding.
Flow range
0.01-999.99 mL/h
Circulating bath temperature
-5 to 100°C
Drying temperature
Ambient to 160°C; stated precision 1°C
- 最終構成は見積前に確認
- 用途に応じてカスタムと付属品を確認
- 輸出梱包と書類は必要に応じて対応
代表的な用途
- Laboratory wet spinning
- Bicomponent coaxial or mixed spinning
設備の特徴
主な製品特徴
-
Dual-channel pump with six syringe slots and ≥400 N thrust
-
Coagulation bath with heating and cooling
-
316 stainless-steel coagulation and washing tanks
-
Sequential drawing, drying and winding
技術データ
技術仕様
仕様はシステム別に整理され、設備タイプごとに重要なパラメータを表示します。
Solution feeding
| Pump configuration | Two channels, six syringe slots; independent flow settings |
|---|---|
| Flow range | 0.01-999.99 mL/h |
| Stated flow precision | 0.01 mL/h |
| Dynamic thrust | ≥400 N |
| Pump stroke | 15 cm |
| Control screen | 4.3-inch touchscreen |
| Syringe compatibility | 5, 10, 20, 30, 50 mL; other standard/non-standard syringes |
Process modules
| Circulating bath temperature | -5 to 100°C |
|---|---|
| Circulating bath capacity | 15 L |
| Circulating bath dimensions | 380 × 535 × 650 mm |
| Coagulation / washing tanks | Jacketed 316 stainless steel with corrosion-resistant coating and insulation |
| Tank dimensions (each) | 80 × 80 × 1000 mm |
| Drawing stages | Three; two-roller winding/drawing; reversible rotation |
| Drawing roller diameter | 65 mm |
| Drawing roller speed | 1-300 rpm |
| Drawing unit dimensions | 320 × 250 × 450 mm |
| Drying temperature | Ambient to 160°C; stated precision 1°C |
| Winder dimensions | 300 × 450 × 400 mm |
仕様は構成やカスタム内容により変更される場合があります。最終データは確認済み見積に従います。
Process sequence
- Metering pump → temperature-controlled coagulation bath → drawing 1 → washing tank → drawing 2 → fiber dryer → drawing 3 → winder.
- The winder has a removable spool with reciprocating traverse. Listed accessories include 21-25G needles, one 22/17 coaxial spinneret, one support, three guide rollers, 10 m tubing and 10 connector pairs.
Installation details to confirm
- Overall line dimensions and total installed power are not specified in the supplied sheet. The dryer size is listed as 440 × 250 × 240 without a unit; confirm the unit and site layout before ordering.
発注前に調達条件を確認できます。
要件を確認
海外購入者向けに、構成、付属品、梱包方法、輸出書類、検査写真または動画、出荷条件を見積確認に含められます。
関連設備
同カテゴリのその他製品
LS-E-02
LS-E-02 Touchscreen Electrospinning Machine
詳細を見る →
LS-E-03
LS-E-03 Touchscreen Electrospinning Machine
詳細を見る →
LS-E-04
LS-E-04 Micro/Nanomaterials Workstation
詳細を見る →
LS-D-01
LS-D-01 Handheld Electrospinning Device
詳細を見る →
LS-D-03
LS-D-03 Handheld Electrospinning Gun
詳細を見る →
LS-D-04
LS-D-04 Adjustable Handheld Electrospinning Gun
詳細を見る →
LS-10
LS-10 Entry-Level Electrospinning Machine
詳細を見る →
LS-11