電界紡糸・繊維作製装置
LS-GY-02 Pilot-Scale Electrospinning Machine
モデルLS-GY-02
Pilot-scale electrospinning system with dual-electrode spinning, roll-to-roll substrate collection, up to 60 cm substrate width and a 20 L solution reservoir.
Collection speed
0-8.99 m/min
Substrate width
0-60 cm
Reservoir capacity
20 L
- 最終構成は見積前に確認
- 用途に応じてカスタムと付属品を確認
- 輸出梱包と書類は必要に応じて対応
代表的な用途
- Pilot-scale electrospun fiber membrane preparation
- Continuous substrate-based collection
設備の特徴
主な製品特徴
-
0 to +80 kV positive and 0 to -30 kV negative high voltage
-
Roll-to-roll collection at 0-8.99 m/min
-
Web alignment and 0.1-10 N tension adjustment
-
Door interlock, emergency stop and earth-leakage protection
技術データ
技術仕様
仕様はシステム別に整理され、設備タイプごとに重要なパラメータを表示します。
General specifications
| Controls | 10-inch touchscreen |
|---|---|
| Power supply | 220 V AC, 50 Hz |
| Maximum total power | 3000 W |
| Maximum heating power | 2000 W |
| Dimensions (L × W × H) | 290 × 110 × 200 cm |
| Weight | 400 kg |
Enclosure and environment
| Exhaust airflow | 200 m³/h |
|---|---|
| Chamber temperature | Ambient to 55.0°C; stated precision 0.1°C |
| UV lamp | 8 W |
Electrical and high voltage
| High-voltage ranges | 0 to -30.00 kV; 0 to +80.00 kV |
|---|---|
| Stated voltage precision | 0.01 kV |
| High-voltage current | 0-5 mA (load dependent) |
Process modules
| Spinning method | Dual-electrode spinning |
|---|
Collection and motion
| Spinning height | 80-300 mm |
|---|---|
| Collection speed | 0-8.99 m/min |
| Substrate width | 0-60 cm |
| Substrate mounting | Air-expanding shaft with quick-release chuck |
| Web alignment | Supported |
| Tension adjustment | 0.1-10 N |
Solution feeding
| Solution brushing speed | 0-500 mm/s |
|---|---|
| Pneumatic feed pressure | 10-500 kPa |
| Reservoir capacity | 20 L |
仕様は構成やカスタム内容により変更される場合があります。最終データは確認済み見積に従います。
Safety and process confirmation
- The catalogue lists current limiting, overtemperature protection, door-opening high-voltage isolation, emergency stop, grounding and earth-leakage protection.
- Substrate speed is not fiber mass output. Production capacity, membrane basis weight and material compatibility must be established for the selected formulation and process.
発注前に調達条件を確認できます。
要件を確認
海外購入者向けに、構成、付属品、梱包方法、輸出書類、検査写真または動画、出荷条件を見積確認に含められます。
関連設備
同カテゴリのその他製品
LS-E-02
LS-E-02 Touchscreen Electrospinning Machine
詳細を見る →
LS-E-03
LS-E-03 Touchscreen Electrospinning Machine
詳細を見る →
LS-E-04
LS-E-04 Micro/Nanomaterials Workstation
詳細を見る →
LS-D-01
LS-D-01 Handheld Electrospinning Device
詳細を見る →
LS-D-03
LS-D-03 Handheld Electrospinning Gun
詳細を見る →
LS-D-04
LS-D-04 Adjustable Handheld Electrospinning Gun
詳細を見る →
LS-10
LS-10 Entry-Level Electrospinning Machine
詳細を見る →
LS-11