Matrices et moules de pressage
83 produits disponibles
PMY-A Φ3-6 Pellet Press Dies
PMY-A Pellet Press Dies. Indenter hardness: HRC68-70; Mold material: Japan High-Speed Tool Steel ASSAB+17; Cavity depth: 20 mm.
Voir les spécifications →
PMY-B Φ7-14 Pellet Press Dies
PMY-B Pellet Press Dies. Indenter hardness: HRC68-70; Mold material: Japan High-Speed Tool Steel ASSAB+17; Cavity depth: 30 mm.
Voir les spécifications →
PMY-C Φ15-25 Pellet Press Dies
PMY-C Pellet Press Dies. Sample size: Ø15, Ø16, Ø17, Ø18, Ø19, Ø20, Ø21, Ø22, Ø23, Ø24, Ø25 mm; Indenter hardness: HRC60-62; Mold material: 440C.
Voir les spécifications →
PMY-D Φ26-40 Pellet Press Dies
PMY-D Pellet Press Dies. Indenter hardness: HRC60-62; Mold material: 440C; Cavity depth: 45 mm.
Voir les spécifications →
PMY-E Φ41-70 Pellet Press Dies
PMY-E Pellet Press Dies. Sample size: Ø50, Ø60, Ø70 mm; Indenter hardness: HRC60-HRC62; Mold material: Alloy Tool Steel:Cr12MoV.
Voir les spécifications →
PMY-F Φ71-100 Pellet Press Dies
PMY-F Pellet Press Dies. Sample size: Ø80, Ø90, Ø100 mm; Indenter hardness: HRC60-HRC62; Mold material: Alloy Tool Steel:Cr12MoV.
Voir les spécifications →
PMY-G Φ101-150 Pellet Press Dies
PMY-G Pellet Press Dies. Sample size: Ø120, Ø150 mm; Indenter hardness: HRC60-HRC62; Mold material: Alloy Tool Steel:Cr12MoV.
Voir les spécifications →
PMF-A 3-10mm Square Press Dies
PMF-A Square Press Dies. Sample size: Length: 3-10 mm; Indenter hardness: HRC60-62; Mold material: 440C.
Voir les spécifications →
PMF-B 11-20mm Square Press Dies
PMF-B Square Press Dies. Sample size: Length: 11-20 mm; Indenter hardness: HRC60-62; Mold material: 440C.
Voir les spécifications →
PMF-C 21-30mm Square Press Dies
PMF-C Square Press Dies. Sample size: Length: 21-30 mm; Indenter hardness: HRC60-62; Mold material: 440C.
Voir les spécifications →
PMF-D 31-40mm Square Press Dies
PMF-D Square Press Dies. Sample size: Length: 31-40 mm; Indenter hardness: HRC60-62; Mold material: 440C.
Voir les spécifications →
PMF-E 41-80mm Square Press Dies
PMF-E Square Press Dies. Sample size: Length: 41-80 mm; Indenter hardness: HRC60-62; Mold material: Alloy tool steel: Cr12MoV.
Voir les spécifications →
PMF-PA 81-150mm Square Press Dies
PMF-PA Square Press Dies. Sample size: Long side81-150 mm; Indenter hardness: HRC60-HRC62; Mold material: Alloy tool steel: Cr12MoV.
Voir les spécifications →
PMF-PB 151-200mm Square Press Dies
PMF-PB Square Press Dies. Sample size: Long side151-200 mm; Indenter hardness: HRC60-HRC62; Mold material: Alloy tool steel: Cr12MoV.
Voir les spécifications →
PMK-YA Φ3-6 Assemble Press Dies
PMK-YA Assemble Press Dies. Indenter hardness: HRC68-HRC70; Mold material: Japanese High-Speed Tool Steel ASSAB+17; Cavity depth: 30 mm.
Voir les spécifications →
PMK-YB Split Cylindrical Pellet Press Die
PMK-YB Split Cylindrical Pellet Press Die. Sample size: Ø7, Ø8, Ø9, Ø10, Ø11, Ø12, Ø12, Ø14 mm; Indenter hardness: HRC60-HRC62; Mold material: 440C.
Voir les spécifications →
PMK-YC Φ15-25 Assemble Press Dies
PMK-YC split cylindrical pellet pressing die, listed for 15-25 mm sample diameters. The separable die construction is intended for cylindrical sample forming and demolding.
Voir les spécifications →
PMK-YD Φ26-40 Assemble Press Dies
PMK-YD Assemble Press Dies. Indenter hardness: HRC60-HRC62; Mold material: 440C; Cavity depth: 50 mm.
Voir les spécifications →
PMK-YE Φ51-80 Assemble Press Dies
PMK-YE Assemble Press Dies. Indenter hardness: HRC60-HRC62; Mold material: Alloy tool steel : Cr12MoV; Cavity depth: 60 mm.
Voir les spécifications →
PMK-FA 3-10mm Square Assemble Dies
PMK-FA Square Assemble Dies. Sample size: Length:3-10 mm; Indenter hardness: HRC60 - HRC62; Mold material: 440C.
Voir les spécifications →
PMK-FB 11-20mm Square Assemble Dies
PMK-FB Square Assemble Dies. Sample size: Length:11-20 mm; Indenter hardness: HRC60 - HRC62; Mold material: 440C.
Voir les spécifications →
PMK-FC 21-40mm Square Assemble Dies
PMK-FC Square Assemble Dies. Sample size: Length: 21-40 mm; Indenter hardness: HRC60 - HRC62; Mold material: 440C.
Voir les spécifications →
PMK-FD 41-60mm Square Assemble Dies
PMK-FD Square Assemble Dies. Sample size: Length:41-60 mm; Indenter hardness: HRC60 - HRC62; Mold material: 440C.
Voir les spécifications →
PMK-FE 61-80mm Square Assemble Dies
PMK-FE Square Assemble Dies. Sample size: Length: 60-80 mm; Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV.
Voir les spécifications →
PMO-A Φ3-40 Ring Press Dies
PMO-A ring-shaped sample pressing die, listed for the 3-40 mm size range. This tooling forms annular specimens rather than solid cylindrical pellets.
Voir les spécifications →
PMO-B Φ41-80 Ring Press Dies
PMO-B Ring Press Dies. Sample size: Ø41-80 mm; Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV.
Voir les spécifications →
PMQ-A Φ3-40 Ball Press Dies
PMQ-A Ball Press Dies. Sample size: Ø5-40 mm; Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV.
Voir les spécifications →
PMQ-B Φ41-80 Ball Press Dies
PMQ-B Ball Press Dies. Sample size: Ø41-80 mm; Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV.
Voir les spécifications →
PMW-A Cemented Carbide Pellet Press Die
PMW-A Cemented Carbide Pellet Press Die. Sample size: Ø5 ~ 10 mm; Indenter hardness: HRC85 - HRC90; Mold material: Alloy tool steel: YT15.
Voir les spécifications →
PMW-B Cemented Carbide Pellet Press Die
PMW-B Cemented Carbide Pellet Press Die. Sample size: Ø14~20 mm; Indenter hardness: HRC85 - HRC90; Mold material: Alloy tool steel: YT15.
Voir les spécifications →
PMW-C Φ21-30 Alloy Dies
PMW-C Alloy Dies. Sample size: Ø21 ~30 mm; Indenter hardness: HRC85 - HRC90; Mold material: Cemented carbide YT15.
Voir les spécifications →
PMD Polygon Shape Pressing Dies
PMD Polygon Shape Pressing Dies. Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV; Cavity depth: 40 mm.
Voir les spécifications →
PMT Special Shape Pressing Dies
PMT Special Shape Pressing Dies. Sample size: Ø5~40 mm; Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV.
Voir les spécifications →
PML Anti-cracking Dies
PML Anti-cracking Dies. Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV; Cavity depth: 40 mm.
Voir les spécifications →
PMC Die with scale
PMC Die with scale. Sample size: Ø10, Ø12, Ø13, Ø15, Ø18, Ø20 mm; Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV.
Voir les spécifications →
PMM Porous Pressing Dies
PMM Porous Pressing Dies. Sample size: 10 × 10 mm; Indenter hardness: HRC60 - HRC62; Mold material: Alloy tool steel: Cr12MoV.
Voir les spécifications →
PMS-P Bidirectional Pressing Die
PMS-P bidirectional pressing die for laboratory sample forming. The die is designed for loading from opposing directions rather than single-direction pressing.
Voir les spécifications →
PMS-KY Bidirectional Split Cylindrical Pressing Die
PMS-KY bidirectional split cylindrical pressing die. It combines a separable cylindrical die body with opposing-direction loading for laboratory sample forming.
Voir les spécifications →
PMS-KF Bidirectional Split Square Pressing Die
PMS-KF bidirectional split square pressing die. The square, separable tooling provides an alternative to cylindrical dies for bidirectional sample pressing.
Voir les spécifications →
PMU Patterned Pressing Die
PMU Patterned Pressing Die. Sample size: Custom shape; Indenter hardness: HRC60-62; Mold material: 440C.
Voir les spécifications →
PMZ Zirconia Pressing Dies
PMZ Zirconia Pressing Dies. Indenter hardness: HRC60-62; Mold material: Zirconia; Cavity depth: 45 mm.
Voir les spécifications →
PMK-DF Multi-Sample Split Pressing Die
PMK-DF multi-sample split pressing die for laboratory specimen preparation. Multiple sample positions and a separable die body distinguish it from a single-cavity die.
Voir les spécifications →
PMF-Y long cylindrical mold
PMF-Y long cylindrical mold. Sample size: Custom shape; Indenter hardness: HRC60 - HRC62; Mold material: 440C.
Voir les spécifications →
PMB Flat Cylindrical Pressing Die
PMB flat cylindrical pressing die for forming round, flat laboratory specimens. It is part of the pellet and shaped-sample tooling range.
Voir les spécifications →
PM-YL Dumbbell-shaped specimen mold
PM-YL Dumbbell-shaped specimen mold. Sample size: Custom shape; Indenter hardness: HRC60 - HRC62; Mold material: 440C.
Voir les spécifications →
PMY-DT Titanium-coated circular mold
PMY-DT titanium-coated circular mold for laboratory sample pressing. This is the coated circular-tooling option in the pellet-die range.
Voir les spécifications →
PM-QT Isostatic pressure chamber
PM-QT isostatic pressure chamber for laboratory pressing systems. The chamber is the pressure-containing tooling component, not a complete standalone press.
Voir les spécifications →
PM-XJ Rubber forming mold
PM-XJ rubber forming mold for laboratory sample preparation. This listing covers the flexible forming mold rather than the hydraulic press used to apply the load.
Voir les spécifications →
PCH-M 300℃ Heatable Pressing Dies
PCH-M heatable pressing die with a listed 300°C configuration. The tooling combines sample forming with heating for laboratory hot-press preparation.
Voir les spécifications →
PCH-G 500℃ Heatable Pressing Dies
PCH-G Heatable Pressing Dies. Heating temperature: Ambient to 500°C; Indenter hardness: HRC60-HRC62; Mold material: Alloy tool steel: 440C.
Voir les spécifications →
PCH-P 300℃ Platen Heatable Dies
PCH-P platen heating die with a listed 300°C configuration. Flat heated tooling is provided for platen-based laboratory sample pressing.
Voir les spécifications →
PCH-H 500℃ Platen Heatable Dies
PCH-H platen heating die with a listed 500°C configuration. It is the higher-temperature platen-tooling option in this heating-die range.
Voir les spécifications →
PMY-R Thin Pellet Press Dies
PMY-R Thin Pellet Press Dies. Heating temperature: Temperature resistance < 500°C; Sample size: Ø40 mm; Indenter hardness: HRC60-HRC62.
Voir les spécifications →
PMF-R Thin Square Press Dies
PMF-R Thin Square Press Dies. Heating temperature: Temperature resistance up to 500°C; Sample size: 20 × 80 mm; Indenter hardness: HRC>60.
Voir les spécifications →
PCH-F Hot-Press Shaping Platen Die
PCH-F Hot-Press Shaping Platen Die. Heating temperature: Ambient to 500°C; Mold material: 304(Stainless Steel); Overall dimensions: 80 × 80 mm, 180 × 180 mm, 200 × 200 mm.
Voir les spécifications →
PCH-H Hot-Press Shaping Platen Die
PCH-H Hot-Press Shaping Platen Die. Heating temperature: Ambient to 500°C; Mold material: 304(Stainless Steel); Overall dimensions: 80 × 80 mm, 180 × 180 mm, 200 × 200 mm.
Voir les spécifications →
PCH-SP Water Cooled Cooling Plate
PCH-SP Water Cooled Cooling Plate. Overall dimensions: Ø105 × 40 mm.
Voir les spécifications →
PC-2T 2 T Screw-Operated Pellet Press
PC-2T Screw-Operated Pellet Press. Pressing load range: 0-2T (0-20 MPa); Working space: 54 × 55; Maximum piston stroke: 5 mm.
Voir les spécifications →
PMH-A 13mm FTIR, KBr Powder Dies
PMH-A FTIR, KBr Powder Dies. Sample size: Ø13 mm; Indenter hardness: HRC72-HRC75; Mold material: Cemented carbide YT15.
Voir les spécifications →
PMH-B 13mm FTIR, KBr Powder Dies
PMH-B FTIR, KBr Powder Dies. Sample size: Ø13 mm; Indenter hardness: HRC72-HRC75; Mold material: Cemented carbide YT15.
Voir les spécifications →
PMH-C 7mm FTIR, KBr Powder Dies
PMH-C FTIR, KBr Powder Dies. Sample size: Ø7 mm; Indenter hardness: HRC72-HRC75; Mold material: Cemented carbide YT15.
Voir les spécifications →
PMH-D 3mm FTIR, KBr Powder Dies
PMH-D FTIR, KBr Powder Dies. Sample size: Ø3 mm; Indenter hardness: HRC60-HRC62; Mold material: 440C.
Voir les spécifications →
PMH-D FTIR Pellet Press Die
PMH-D FTIR pellet pressing die for preparing compact samples for infrared analysis. This listing covers the die tooling, not a complete FTIR spectrometer.
Voir les spécifications →
PMD-R Heatable Round Dosing Mold
PMD-R Heatable Round Dosing Mold. Heating temperature: Ambient to 300°C; Sample size: Ø25 mm; Mold material: Alloy tool steel.
Voir les spécifications →
PMH-600A FTIR Flat Heating Dies
PMH-600A FTIR Flat Heating Dies. Heating temperature: 0-300°C / 400°C dual-channel heating; Mold material: 440C stainless steel; Overall dimensions: 200 × 60 mm.
Voir les spécifications →
PMH-600B FTIR Quantitative Heating Dies
PMH-600B FTIR Quantitative Heating Dies. Heating temperature: 0-300°C / 400°C dual-channel heating; Mold material: 440C stainless steel; Overall dimensions: 200 × 60 mm.
Voir les spécifications →
HF-7 Demountable Liquid Cell
HF-7 Demountable Liquid Cell. Dimensions: Ø32 × 4 mm.
Voir les spécifications →
HF-8 Sealed Liquid Cell
HF-8 Sealed Liquid Cell. Dimensions: 13 × 20 mm.
Voir les spécifications →
HW-11 Infrared Gas Cell
HW-11 infrared gas cell for gas-sample measurement by infrared spectroscopy. It is a sampling accessory rather than a standalone spectrometer.
Voir les spécifications →
HW-12 Heated Infrared Gas Cell
HW-12 heated infrared gas cell for gas-sample spectroscopy. The heated-cell configuration distinguishes it from the unheated gas-cell accessory.
Voir les spécifications →
HW-10A Infrared Flow Cell
HW-10A infrared flow cell for measurements using a flowing sample. It is an optical sampling accessory for an infrared spectroscopy setup.
Voir les spécifications →
HW-BJ Variable-angle transmission accessory
HW-BJ variable-angle transmission accessory for infrared spectroscopy. The adjustable transmission geometry allows measurements at different sample angles.
Voir les spécifications →
HWJ-1 Magnetic Film Sample Rack
HWJ-1 Magnetic Film Sample Rack. Dimensions: Ø13 mm.
Voir les spécifications →
HWJ-2 Universal Sample Rack
HWJ-2 Universal Sample Rack. Dimensions: Ø13-32 mm.
Voir les spécifications →
HWJ-3 Colorimetric Plate Rack
HWJ-3 Colorimetric Plate Rack. Cuvette dimensions: 10-40 mm in length.
Voir les spécifications →
HWJ-6 Lock-type Sample Holder
HWJ-6 locking sample holder for infrared spectroscopy. The locking arrangement secures the sample holder within the measurement setup.
Voir les spécifications →
HWJ-7 Slide Sample Clip/Holder
HWJ-7 slide sample clip for infrared spectroscopy. The holder is designed for slide-format samples rather than a liquid or gas cell.
Voir les spécifications →
HWJ-9 Polystyrene Film
HWJ-9 polystyrene film accessory for infrared spectroscopy. This listing provides the film sample used with the spectroscopy accessory range.
Voir les spécifications →
HW-JS Infrared ATR Reflection Accessory
HW-JS ATR reflection accessory for infrared spectroscopy. The ATR sampling format measures a sample through contact with an internal-reflection element rather than a transmission cell.
Voir les spécifications →
HW-10A Infrared Electronic Dry Cabinet
HW-10A electronic dry cabinet for storing infrared spectroscopy accessories. The cabinet provides storage separately from the instrument measurement compartment.
Voir les spécifications →
HF-5A Infrared Colorimetric Dish
HF-5A Infrared Colorimetric Dish. Capacity: 7 ml; Optical path: 10 mm-40 mm; Wavelength range: 200nm-2500nm.
Voir les spécifications →
HW-3A Infrared Oven
HW-3A Infrared Oven. Capacity: 32 L; Overall dimensions: 507 × 382 × 308 mm.
Voir les spécifications →
HWD-240 Infrared Baking Lamp
HWD-240 Infrared Baking Lamp. Power supply: 220 V 50 Hz.
Voir les spécifications →Commencez par le besoin procédé, puis comparez la plage de fonctionnement, la taille de chambre ou de travail, la précision de contrôle, les accessoires, les utilités et les contraintes d’expédition.
- Confirmez le matériau, la taille d’échantillon et le résultat cible.
- Vérifiez la tension, l’espace d’installation et les utilités.
- Demandez les accessoires, pièces de rechange, emballage et documents inclus.